Router Configuration in CLI mood

I take course in CCNA provide by RUET. This course have four semister. I am now in first semister. In my lab i have learned configure the router in the CLI mood. So i want to share it with you…..


Now there is some code:

Router#configure terminal 

//now we are going to put the ip address of the firsteathernet0/0


Router(config)#interface fa
Router(config)#interface fastEthernet0/0
Router(config-if)#ip add
Router(config-if)#ip address

//ip address and subnet mask that you want to configure

//now we are going to put the ip address of the serial port0/0:

Router(config)#interface serial2/0
Router(config-if)#ip add
Router(config-if)#ip address

##in the same way we can put the value of firsteathernet0/0, serial port 0/0 of other router conected to it…….

//now we are going to keep the router passward protecteed:

//To change hostname
Router(config)#hostname CCNA
CCNA(config)#line co
CCNA(config)#line console 0
CCNA(config-line)#password cisco

// now the enable password:

Router(config)#hostname CCNA
CCNA(config)#enable password cisco

// now the enable Telnet:

Router(config)#line vty 0 4

Router(config)#password class


//Now we can configure Router from the host by enable telnet.

One thought on “Router Configuration in CLI mood

  1. Welcome to the world of sharing. Its a great matter that boys like you are publishing blog to help AND OR suggest others. Please be rugular in writing to your blog.

Leave a Reply to Nuhil Cancel reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s